Pool Heater Installation Services in Florida
Heat pump supply, sizing, and professional installation — backed by 30 years of experience.
Your pool should be comfortable year-round. We supply and install pool heat pumps for Florida homeowners and commercial properties — handling everything from sizing and permitting to installation and testing.
✓ HVAC & EPA 608 Certified | ✓ License #CPC056806 | ✓ Worksmanship Warranty
Already have a heater that needs replacing? See our pool heater replacement services →
Why Florida Pool Owners Choose Heat Pumps
How They Work
Pool heat pumps work like your AC in reverse — they extract heat from the air and transfer it to your pool water. Because they move heat rather than create it, they’re remarkably efficient and produce zero direct emissions.
Florida’s climate is ideal. Heat pumps perform best above 50°F, and Central Florida averages 65°F+ year-round — meaning yours runs at peak efficiency every month, quietly and reliably.
Operating Cost Savings
For a typical 15,000-gallon pool in Central Florida:
- Heat pump: $50-$100/month
- Gas heater: $200-$400/month
That’s up to $3,600 saved every year. Over 10 years, as much as $36,000 back in your pocket.
When Gas Makes Sense
Gas pool heaters can be good fits for:
- Spa-only heating: Rapid temperature increases (15-20°F in 20 minutes)
- Vacation rentals: Infrequent use requiring quick heating
- Northern Panhandle: Winter temps regularly in the 40s
For 95% of Florida pool owners wanting consistent, affordable, year-round heating, heat pumps are the best choice.
Pool Heater Comparison:
Heat Pump vs Gas vs Solar
Based on 15,000-gallon pool. Costs vary based on pool cover usage, desired temperature, and local utility rates.
| 💧 Heat Pump | 🔥 Gas Heater | ☀️ Solar | |
|---|---|---|---|
| Initial Cost | $4,500-$8,500 | $3,000-$5,500 | $8,000-$15,000 |
| Monthly Operating Cost | $30-$100 | $200-$400 | $10-$30 |
| 5-Year Total Cost | ~$10,500 | ~$18,400 | ~$12,250 |
| Lifespan | 10-15 years | 5-8 years | 15-20 years |
| Heating Speed | 3-5°F/day | 2-4°F/hour* | Weather dependent |
| Heating & Cooling | ✓ Yes (select models) | ✗ No | ✗ No |
| Works at Night | ✓ Yes | ✓ Yes | ✗ No |
| Works on Cloudy Days | ✓ Yes | ✓ Yes | ✗ Highly Limited |
| Space Required | Minimal | Minimal-Large (May require gas tank) | Large roof area |
| Noise Level | Quiet (50-60 dB) | Moderate (60-75 dB) | Quiet (under 50 dB) |
| Best For | Year-round heating | Rapid heating, spa-only | Seasonal heating with ideal roof conditions |
| Florida Fit | Excellent | Good | Fair (Supplemental heating only) |
Solar has the lowest operating cost, but it can’t reliably maintain temperature at night or on cloudy days, requires significant roof space, and costs the most upfront.
For most Florida pools, a heat pump delivers the best balance of cost, reliability, and year-round performance.
Heating & Cooling: Some heat pump models can also cool your pool in the summer (like the Oasis Platinum Ultra Quiet), which gives you full temperature control year-round. So whether it’s a hot day or a cold one, your water stays the perfect temperature.
Want to spend more time in your pool, year-round?
Get a free sizing consult — we’ll recommend the right unit for your pool and budget.
What's Included in Our Installation
- Unit supply — We supply and install Oasis pool heat pumps, or we'll install a unit you've already purchased
- Proper sizing — We calculate the right BTU output for your pool before anything is ordered
- Permit assistance — We handle the permitting process on your behalf as part of the installation
- Professional installation — Certified technicians handle plumbing, electrical, and pad placement to manufacturer specs
- System testing — We don't leave until the unit is running and hitting target temperature
- Up to 90-day workmanship warranty — If something isn't right with our work, we come back and fix it
Pool Heater Installation Process
Step 1
Free Consultation
We assess your pool, calculate exact BTU requirements, check electrical capacity, and give you a written quote. No obligation.
Step 2
Permit
Florida requires permits for electrical and plumbing work. We handle everything — county paperwork, HOA approvals, inspections.
Step 3
Heater Install
Certified technicians handle all plumbing connections, electrical hookup, and equipment mounting
Step 4
Testing & Handoff
We run the unit, verify water flow, confirm temperature rise, and walk you through the controls.
Step 5
Final Inspection
We handle the final inspection and hand you everything — permits, warranties, and maintenance schedule. Then your pool is ready.
Step 6
Ongoing Support
You call the same number for questions, maintenance, or repairs. We’re here long after installation day.
Ready to get started?
We’ll handle everything — sizing, permits, installation, and testing.
Pool Heater Installation Cost in Florida
Installation Item | Typical Range |
|---|---|
Heat pump unit | $2,500–$6,500 |
Installation labor | $500–$1,200 |
Electrical (if needed) | $0–$1,500 |
Permitting fees | $150–$400 |
Cost for most installs | $4,500-$8,500 |
Note: Prices shown are typical ranges. Your exact cost may vary based on equipment size, electrical needs, site conditions, and permitting. We’ll evaluate your setup and provide a clear written estimate before any work begins.
What affects your total:
Pool size and required BTU, whether existing electrical service is sufficient, distance from the panel, equipment pad condition, and unit brand and model.
One thing to know about electrical:
A heat pump needs a dedicated 208–230V, 40–60 amp circuit. If it’s already in place, installation is straightforward. If new wiring or panel upgrades are needed, that’s usually the biggest cost factor. We’ll review this with you before any work begins.
Want to know exactly what your installation will cost?
We’ll give you a clear, written estimate — no obligation, no surprises.
Sizing Your Pool Heater
What size heat pump do you need?
Basic pool heater sizing for Florida
Proper sizing is important. Too small, and your pool may not stay warm. Too large, and you’re paying for more than necessary.
- Small pools (up to 15,000 gallons):
- Recommended Size: 50K-75K BTU
- Medium pools (15,000–25,000 gallons)
- Recommended Size: 75,000–110,000 BTU
- Large pools (25,000–35,000 gallons)
- Recommended Size: 110,000–140,000 BTU
- Extra-large pools (35,000+ gallons)
- Recommended Size: 140,000+ BTU
- Florida advantage: our mild climate means you can often size slightly smaller than northern states — same performance, lower cost.
Key factors beyond pool size:
- Pool surface area (heat loss at surface)
- Desired temperature
- Pool cover usage
- Wind exposure
- Screened enclosure
Note: We always measure your pool and review your setup to make sure the system is properly sized for the best performance and efficiency.
Benefits of Pool Heating in Florida's Climate
Swim year-round
Maintain 78-82°F even when December nights drop into the 50s
Increase property value
Year-round heated pools are a top selling feature for Florida homes
Better water chemistry
Stable temps reduce algae growth and lower chemical costs
Protect your investment
Regular use prevents stagnant water issues before they become costly
Why Florida Pool Owners Choose Medallion Energy
#CPC056806 | EPA 608 Certified | HVAC Certified
- 30+ Years Experience
- We Repair What We Install
- Statewide & nationwide service available
We install and service pool heaters every day. That experience helps us do the job right every time.
3,000+ repairs across Florida taught us which components fail first, which brands hold up, and what installation mistakes cause problems years later.
That knowledge goes into every installation — and it’s the same experience behind our pool heater repair services if you ever need us after the install.
Our Track Record
What Our Customers Are Saying
- "Medallion Energy is the only company in this industry that I will recommend to any and all that I encounter!! Thanks, Jim!! You and Denice are a 5-star operation!! "
- "They say in business you can only have two of these three and must forfeit one: Speed, Price and Quality. The one exception I’ve found is with Medallion Energy. Jim gave us all three!"
- "I would like to acknowledge this company for their exceptional customer service. We found all employees to be professional, friendly and accommodating."
- "Excellent service and now the heater is up and running! Wish all companies operated like Medallion Energy! Five stars and highly recommend. Thank you!"
- "Our pool heater for our complex is up and running fine. Thank you for such a quick response, dedication and concern for customer satisfaction! Its people like you that restore the faith in the business world!"
- "We recommend everyone to use Medallion Energy for all services! Their good work ethic is outstanding and refreshing! Thank you Jim, Denise, and Ken!"
- "This company goes far and above any company I have ever had to deal with...the best all around. Thank you very much Jim and Denise, my daughter and grandsons had a blast because of you and your company."
Denise did a fantastic job helping isolate and identify an electrical issue. She worked directly with me throughout the troubleshooting process, demonstrating professionalism, patience, and a collaborative attitude as we checked various voltages. She provided logical explanations for the readings and offered a well-reasoned theory about the potential cause of the issue. Subsequent investigation confirmed that her speculations were correct. I was very impressed with her technical knowledge, methodical approach, and ability to work through the problem.
Google Review 5/5 Stars — Outstanding Service and Expert Guidance I cannot say enough good things about Medallion Energy. When I ran into an issue with my pool heat pump's control board, the owner, Jim Diroff, reached out to me personally to help work through it. Jim was extremely professional, courteous, and knowledgeable. He walked me step-by-step through troubleshooting the board, which helped us reach a clear conclusion: after 20+ years of faithful service, it was finally time to replace my old pool heater. Because of Jim's exceptional customer service, I am purchasing my new pool heater directly from Medallion Energy and having it shipped to Maryland. If you want honest advice, deep expertise, and a company that truly values its customers, look no further. Highly recommended!
I want to thank Medallion Energy for helping me getting my heat pump working again. The display said "FLO" despite adequate water moving through the system and I was sure that it was the water pressure control switch that needed replacement. After reaching out to them via email they called me back and asked me what was going on. After explaining the issue they agreed that it was most likely the switch and shipped me a new one. It even came with directions on how to replace it. Once replaced I turned the heater on and it is working again. That saved me a huge bill to replace the heater. Thanks Medallion Energy for your help.
AquaComfort stands behind their products and delivers exceptional service. My husband and I could not be more pleased with this company. The service team went above and beyond to fix our concerns even when the warranty was expired.
Florida pool owners are swimming year-round. You should be too.
Warm water, perfect temperature, any time you want. Get a free quote and let’s make it happen.
Pool Heat Pump Brands We Install
Oasis Pool Heat Pumps
We manufacture and install Oasis pool heat pumps, engineered specifically for Florida’s heat, humidity, and year-round demands.
- High Energy Efficiency — COP of 6.7, one of the most cost-effective units on the market
- Ultra Quiet — whisper-quiet 50 dB operation, you’ll barely know it’s running
- Low Operating Costs — up to 75% cheaper to run than gas
- Heats and cools — full year-round temperature control
- Built stronger — commercial-grade titanium heat exchanger, seacoast-treated coil, engineered for Florida’s harshest conditions
Other Brands We Install
We install all major heat pump brands — Hayward, Pentair, Raypak, Jandy, AquaCal, and more including AquaComfort, AquaPro, Built Right, FocusTemp, Gulfstream, Intermatic, Nirvana, Rheem, Thermeau, Sunrunner, and Zodiac.
Already bought a pool heater? We install customer-supplied heat pumps too.
Gas heaters: We repair and service all major gas pool heater brands across Florida.
FAQs
How much does it cost to put a heater in a pool?
Heat pump installation typically runs $4,500–$8,500 all-in — covering the unit, labor, permitting, and any electrical work needed. The biggest variables are pool size, required BTU output, and whether your electrical service needs upgrading. You’ll always get a written estimate before we start.
How much does it cost to add a heater to an existing pool?
Most of our installations are retrofits — adding a heat pump to an existing pool is straightforward in most cases. We connect to your current plumbing and equipment pad. Total cost typically runs $4,500–$8,500 all-in, depending on pool size, electrical requirements, and whether the pad needs work. You’ll get a written estimate before anything is scheduled.
How many BTUs do I need to heat a 20,000 gallon pool?
For a 20,000 gallon pool in Florida, plan on 90,000–110,000 BTUs. That range accounts for Florida’s mild climate, typical nighttime temperature drops, and average pool depth. If you have an attached spa, heavy shade, or no pool cover, size toward the higher end. We calculate the exact BTU requirement for your pool during the free consultation.
What size heat pump do I need?
Pool size is the starting point. As a general guide: up to 15,000 gallons needs 50,000–75,000 BTU; 15,000–25,000 gallons needs 75,000–110,000 BTU; 25,000–35,000 gallons needs 110,000–140,000 BTU. Beyond pool size, key factors include whether you use a pool cover, wind exposure, screened enclosure, and attached spa. We size every installation before recommending anything.
Can I install a pool heat pump myself?
The electrical hookup requires a licensed electrician — heat pumps need a dedicated 220V/50-amp circuit. Refrigerant handling requires EPA 608 certification by law. DIY installation also voids most manufacturer warranties. Professional installation protects your investment and ensures the system is set up correctly from day one.
How long does a heat pump take to heat a pool?
For an average Florida pool, expect 24–72 hours from a cold start to reach your target temperature. Once there, a heat pump maintains it efficiently with minimal energy. A pool cover significantly reduces both heat-up time and monthly operating cost.
How long does a pool heat pump last?
10–15 years with proper maintenance — cleaning coils, checking refrigerant, replacing capacitors as needed. Gas heaters typically last 5–8 years by comparison. The longer lifespan is one of the key reasons heat pumps win on total cost of ownership in Florida.
What's the difference between a pool heater and a pool heat pump?
A heat pump is a type of pool heater — and the most popular type in Florida. It uses electricity to extract heat from the air and transfer it to your pool water, making it highly energy efficient. Gas heaters burn fuel to heat water directly — faster to heat up, but significantly more expensive to operate monthly. Some heat pump models can also cool your pool in summer, giving you full temperature control year-round.
Is a heat pump or gas heater better for Florida?
For most Florida pool owners, a heat pump is the better long-term choice. Florida’s warm climate keeps heat pumps running efficiently year-round, with operating costs of $50–$100/month vs. $200–$400+ for gas. Heat pumps also last significantly longer. Gas makes sense for spas needing rapid heat-up, vacation rentals with infrequent use, or Panhandle properties where winter temps regularly drop into the 40s.
Is a pool heater worth it in Florida?
Yes, for most pool owners. Winter months drop pool temps into the low 60s, which is too cold for comfortable swimming. A heat pump maintains 78–82°F year-round for $50–$100/month. It pays for itself by year 3 compared to gas, and every year after that is pure savings. The bigger question is which type is right for your pool.
Do I need a permit to install a pool heater in Florida?
Yes. Electrical and plumbing modifications require permits under Florida building codes. We handle the permitting process as part of our installation — you don’t deal with the county paperwork.
How long does installation take?
Most residential heat pump installations are completed in one day once permits are approved. Permitting typically takes 3–7 business days depending on your county.
Do you install heat pumps statewide?
Yes, all of Florida, from Central Florida to Miami, Tampa to Jacksonville. We also install nationwide for residential and commercial properties.
Do you install customer-supplied units?
Yes. If you’ve already purchased a heat pump, we can install it. We’ll confirm the unit is correctly sized for your pool before installation day to make sure you’re not starting off with the wrong equipment.
What warranty comes with a new heat pump installation?
The unit carries the manufacturer’s warranty, which is typically 1–5 years depending on brand and model. Our installation labor is covered by our workmanship warranty of up to 90 days. If something isn’t right with how we installed it, we come back and fix it.
Your pool should be warm and comfortable.
Let's make it happen.
Get a pool heater installation quote tailored to your pool and location. No obligation, no contracts.